Generate a virtual prepaid token to load credit onto your meter.
Your Token:
Enter this token into the meter using the keypad and press SEND to load credit.
Meter Commands
000 Restart meter
009 Get most updated KWH reading
100 Display meter number
070 Display current date
071 Display current time
087 Check current frequency (Hz)
Check Current Amperage Being Used
075 Red Phase or Phase 1 Red
076 Phase 2 Blue
077 Phase 3 Yellow
Check Current Voltage Being Used
078 Phase 1 Red
079 Phase 2 Blue
080 Phase 3 Yellow
Check Current Wattage Usage
081 Phase 1 Red
082 Phase 2 Blue
083 Phase 3 Yellow
Note: Most users are on single phase meters. If a phase returns 0, that phase is not active. Active phases return non-zero values.
Load Simulator
⚠️ LOAD CREDIT FIRST ⚠️
Please load credit on your meter before turning on appliances.
🔧 Pump Security Check Scenario Active
Please turn ON only these appliances to establish your baseline load (~0.46kW):
Refrigerator
Television
Ceiling Fan
LED Bulbs (5x)
Laptop Charger
Other appliances are disabled for this scenario. Once all required loads are ON, go back to Scenarios tab and click "Check Pump Status".
Current Power Draw
0.0
Amps
220
Volts
0.00
kW
Turn appliances on/off and use the meter commands to see real-time changes in power consumption.
Refrigerator
150W / 0.68A
Air Conditioner
1500W / 6.82A
Television
120W / 0.55A
Electric Iron
1000W / 4.55A
Ceiling Fan
75W / 0.34A
Electric Kettle
2000W / 9.09A
LED Bulbs (5x)
50W / 0.23A
Laptop Charger
65W / 0.30A
Water Pump
1600W / 7.27A
Common Scenarios
Low Voltage Scenario
You notice your fan speed is reducing and lights are flickering in the house and suspect LOW CURRENT (which is actually Low Voltage but Nigerians got used to the former). What do you do?
Try this:
Click the button below to simulate low voltage, then use meter codes 078, 079, or 080 and press SEND to check voltage levels.
Check Remaining Credit Before Holiday
You need to know how much electricity credit you have left before traveling for the holidays. You've had some or all appliances running for a while and want to see how much credit remains.
Try this:
First, turn on some or all appliances in the Load Simulator tab. Then click the button below to simulate running those loads for several hours. Finally, use code 009 and press SEND to check your remaining balance.
High Power Consumption - Pump Security Check
You live in an area where thieves steal a lot of things. Your compound uses a borehole and the water pump is on your meter. The pump has been stolen before. You've always used the kW checking code to know that all your daily load is a steady 0.46kW (refrigerator, TV, fan, LED bulbs, laptop), but when the pump is on, it shoots up to 2.1kW.
Step 1: Click "Setup Pump Scenario" below Step 2: Go to Load Simulator tab and turn ON the required appliances (see reminder there) Step 3: Come back here and click "Check Pump Status" Step 4: Use meter codes (081, 082, or 083) to check if your pump is working or stolen